Cables

- Use: Brake - Length: 30mm - Diameter: 5mm

Shifting cables for Road/Mountain bikes.

- Use: S.I.S. - Length: 30mm

- Galvanized steel inner wire - PTFE lined brake housing - Front or Rear - Mountain or road

- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm

- Complete cable kits for internal three-speed hubs

- Steel cable noodle with alloy end caps - Includes plastic liner

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. • Forged aluminum construction • Mounts to most frame or fork mounting holes • Great for tricky cantilever brake setups • Lightweight design • Front for fork mount / Rear for frame mount

Origin-8's Seat Binder Cable hanger provides optimal cantilever brake cable routing. It mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop. - Mounts to most seat binder bolts - Aluminum construction - Great for cantilever brake

With more disc brake platforms on the market than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why we developed the Quick-Fit Hydraulic Hose adapter system, a foolproof approach utilizing proven caliper-adapter technology from the motorcycle world. Pro universal hoses makes it safe and easy to dial in a perfect fit. Simply select a Pro hydraulic hose and match it with a compatible Mountain Pro Quick-Fit adapter kit. It’s that easy. Pro Hydraulic Hoses come in a wide array of colors. Pro Quick-Fit adapter kits are available separately in convenient packaging for the most popular brake manufacturers and models. - A Kevlar weave surrounding the liner prevents bulges due to heat buildup and extreme pressure - Each hose has 2 caliper-side universal couplers that connect to the Quick-Fit Adapters (sold separately) - Mountain Pro hydraulic hose kits are available in 12 colors and finishes - Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation Compatibility - HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355 - HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070

The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement. - Pro Slick Polished inner cables reduce friction and have no coating to wear off - Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance - Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included - Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing - Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits - Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation

Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

- BMX brake cable kits for front or rear application - 1.5mm galvanized inner slick cable - Cable length: 1700mm / 67-inches - Housing length: 1750mm / 69-inches

Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length

- Galvanized steel inner wire - Standard 5mm brake housing - Front or Rear