Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post.
Compatible with: DIVINE SL and DIVINE SL RASCAL
Service kit for 100 hour service (readjusting play and replacing wiper).
Kit includes:
- 1x Wiper
- 6x Glide pin
- 1x Lower bushing
- 1x Foam ring
- 1x C-clip
- 1x Upper bushing
Service kit for 100 hr service (re-adjusting play and replacing wiper).
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version.
To determine the correct service kit for your post, please copy this link into your web browser:
https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf
Kit includes:
- 1x Wiper (with spring)
- 6x Glide pin
- 1x Lower bushing (grey, with line marking)
- 1x Foam ring
- 1x C-clip R12
BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts.
The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear.
- Suitable for all BikeYoke dropper posts
- Size: 250ml (lasts for several full services)
Valve-extension-adapter.
Allows easier access to your dropper valve for shock-pumps with short valve heads.
This BikeYoke allows the use of a standard shock in your Specialized bike.
Stumpjumper 2016-2018
Turbo Levo 2016-2018
Includes:
- 1x BikeYoke SJ02
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.
Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again.
- Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm
- Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
- Compatible with KMC, Shimano 10 speed chains
- DLC Coated
- Reusable
- No Tool Required
- Card of 2 pairs
- From a long line of tough, light-weight chain engineering from SRAM
- Chain connector type: PowerLock
- For Use with SRAM 12-Speed Road Chains Only
- No tools necessary to install
- Chain connector qty/packaging: 4
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.98 - $36.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.99 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$2.09
- Routes cables underneath the bottom bracket
- Will not rust or corrode
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.59
- Model: Derailleur Bolt & Nut
- Compatibility: Mounts rear bracket to frame
Page 1 of 25
Next page